CLEVERPROOF™ COLD POLYUREA is a two component, fast curing, cold applied polyurea waterproofing material. It creates an elastic and durable film layer on the surfaces.
Terraces and Balconies
Bridges and Tunnels
Wet areas
Floors
Undertile applications
Reinforced concrete structures
Easy to apply (via brush, roller or spray)
It does not require expensive application equipment and machinery
The product provides a seamless single layer film which prevents leaks
It provides an elastomeric and hydrophobic layer
It is permeable to water vapor. It is breathable. It does not cause moisture accumulation in the substrate
Even if the COLD POLYUREA is damaged in some way, the damaged part can be repaired quickly and easily
Provides effective resistance against chemicals
Fast curing in all weather conditions
It has heat resistance performance between -40°C and +90°C
Surface Preparation:
The surface to be treated shall be cleaned from adherence and adhesion weakening factors such as oil, grease, paraffin waste, cement grout, loose particles, mold release agents, cured old membranes. If necessary the surface shall be washed with high pressure water jet, and be thoroughly dried. Surface defects such as cracks, unevenness etc should be repaired with suitable products.
Priming :
The prepared surface should be primed with CLEVERPRIME™EPOXY PRIMER WB
Product Application :
Before using, the package should be opened and mixed with a low speed mixer for 2-3 minutes. The products should be applied @ 2.0 to 3.0 kg/m2 with a roller or brush until the entire surface is covered, at least in two layers. After the first coat is applied, the second coat should be applied in minimum 4 and maximum 24 hours. If the application of the second layer has not been made within the specified time, before application please consult to the CLEVER CUSTOMER SUPPORT for information and solutions.
PU 650 TC 1K should be used as a top coat in order to use it in places exposed to UV and pedestrian traffic.
Apply polyurethane based liquid waterproofing membrane CLEVERPROOF™400 BT 1K AQUA @ 3.0 kg/m2 in two coats on primed surface after necessary surface preparation.
For more details and technical proposals click here to contact CLEVER CUSTOMER SUPPORT
For more details and technical proposals click here to contact
CLEVER CUSTOMER SUPPORT.
28/6, Natesh Building
100 Feet Bypass Road, Velachery
Chennai – 600 042 India.
‘Thamarai’ A32, Shantiniketan
City Link Road, Adambakkam
Chennai 600088, India
1st Cross Street,
Balaji Nagar (East), Ambattur
Chennai – 600053, India
© 2023 Rayar Infra Private Limited. All Rights Reserved.
